Terrain FWD L4-2.4L (2010)
1. Install new seal washers to the compressor hose. Refer to Air Conditioning System Seal Replacement (See: Coupler HVAC/A/C Coupler
O-ring/Service and Repair/Air Conditioning System Seal Replacement).
2. Install the compressor hose (2) to the compressor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the compressor hose nut (1) to the compressor and tighten the nut to 22 Nm (16 lb ft).
4. Connect the electrical connector to the air conditioning refrigerant pressure sensor valve.
5. Lower the vehicle.
6. Position the compressor hose in the vehicle.
7. Install a new sealing washer to the air conditioning evaporator thermal expansion valve tube hose. Refer to Air Conditioning System Seal
Replacement (See: Coupler HVAC/A/C Coupler O-ring/Service and Repair/Air Conditioning System Seal Replacement).
8. Install the air conditioning evaporator thermal expansion valve tube hose to the compressor hose.
9. Install the compressor hose nut (1) to the air conditioning evaporator thermal expansion valve tube hose and tighten the nut to 22 Nm (16 lb ft).