Terrain FWD L4-2.4L (2010)
10. Remove the 2 power steering fluid cooling pipe bolts (1) from the front bumper impact bar.
11. Disconnect the 3 power steering fluid cooling pipe clips (2).
12. Remove the power steering fluid cooling pipe (3) from the vehicle.
Installation Procedure
1. Position the power steering fluid cooling pipe (3) in the vehicle.
2. Connect the 3 power steering fluid cooling pipe clips (2).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the 2 power steering fluid cooling pipe bolts (1) to the front bumper impact bar and tighten to 9 Nm (80 lb in).
