Terrain FWD L4-2.4L (2010)
5. Disengage tension on the radiator inlet hose clamp (1) at the engine using J 38185 - Hose Clamp Pliers.
6. Remove the radiator inlet hose (2) from the engine.
7. Remove the radiator inlet hose from the vehicle.
Installation Procedure
1. Install radiator inlet hose to the vehicle.
Note: Lubricate the inside diameters of the hose with clean coolant prior to installation.
2. Install the radiator inlet hose (2) to the engine.
3. Engage tension on the radiator inlet hose clamp (1) at the engine using J 38185 - Hose Clamp Pliers.
