Terrain FWD L4-2.4L (2010)
Note: The control arm must be clean and free of debris.
1. Install the ball joint to the control arm as previously noted.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note:
*
Only use hardware provided with the new ball joint.
*
The bolts must be installed with the bolt head on top of the ball joint.
2. Install the ball joint to control arm bolts and tighten the bolts/nuts to 68 Nm (50 lb ft).
3. Install the lower control arm. Refer to Lower Control Arm Replacement (See: Control Arm/Service and Repair/Front Suspension).