Terrain FWD L4-2.4L (2010)
Note: When disconnecting the stabilizer link, hold the link with a wrench to prevent turning.
5. Remove the stabilizer link to lower control arm nut.
6. Remove the stabilizer link from the vehicle.
Installation Procedure
1. Position the stabilizer link through the lower control arm.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
Note: When connecting the stabilizer link, hold the link with a wrench to prevent turning.
2. Install the stabilizer link to lower control arm nut and tighten to 15 Nm (11 lb ft).