Terrain FWD L4-2.4L (2010)
8. Using the J 35910 - pliers breaker bar, torque wrench and or ratchet (1) , close the boot clamp (2) until the gap (3) measures 2.15 mm (0.085 in).
9. Using the J 35910 - pliers (3), breaker bar (5), torque wrench and or ratchet (4), close the clamp until the gap (6) measures 1.9 mm (0.070 in).
10. Rotate the housing in a circular motion to distribute the grease in the tripot joint.
11. Install the wheel drive shaft from the vehicle. Refer to Front Wheel Drive Shaft Replacement (See: Service and Repair).
