Typhoon V6-262 4.3L Turbo (1993)
Push On Fan Assembly Procedure
INSTALL OR CONNECT
1. Press fan onto shaft (see accompanying figure).
-
Grasp fan by dome and apply hand pressure to fan dome, insert fan on motor shaft until slightly seated on shaft.
-
Place fan and motor on a combination of 10mm x 3/8" drive socket and 1/2" x 3/8" reducer (see accompanying figure).
-
While steadying the fan and motor, apply steady force to rear of motor shaft using a drill press or small arbor press and pin.
Adjust
-
Fan cage, using spacers, to a clearance of 5.5mm (0.22 inches) to motor mount plate.
2. Blower motor and fan assembly.
-
Check circuit operation.
Without A/C