Typhoon V6-262 4.3L Turbo (1993)
^
Nut to 250 Nm (185 ft. lbs.).
^
Rotate the steering gear back to proper Position and remove the block of wood.
3. Two steering gear bolts.
TIGHTEN
^
Three steering gear bolts to 75 Nm (55 ft. lbs.).
4. Pitman arm ball stud (12) to the relay rod. Using J 29193.
5. Pitman arm ball stud nut (11) and spring washer (14).
TIGHTEN
^
Nut to 82 Nm (60 ft. lbs.).
6. Splash shield.
7. Oil filter pipes to the crossmember bracket.
8. Intermediate shaft. Line up the marks made at removal.
^
Slide the intermediate shaft cover down.
9. Air snorkel assembly.
