Typhoon V6-262 4.3L Turbo (1993)
Clutch Master Cylinder: Service and Repair
Fig. 2 Clutch Master Cylinder
REMOVAL
1.
Disconnect battery ground cable.
2.
Remove sound absorbing panel from upper left side foot well.
3.
On 1989-93 models, remove lower left side air conditioning duct if needed.
4.
On all models, disconnect master cylinder pushrod from clutch pedal.
5.
Remove master cylinder retaining nuts, Fig. 2.
6.
Disconnect reservoir hose and slave cylinder hydraulic line from master cylinder.
7.
Remove clutch master cylinder.
INSTALLATION
1.
Position master cylinder at front of dash, then install retaining nuts and torque to 10-15 ft. lbs., Fig. 2.
2.
Connect master cylinder pushrod to clutch pedal and install retaining clip.
3.
Install sound absorbing panel.
4.
Install lower left air conditioning duct if removed.
5.
Connect reservoir hose and slave cylinder hydraulic line to master cylinder.
6.
Connect battery ground cable.
7.
Bleed system.
