V 2500 P/U 4WD V6-262 4.3L (1987)
Installing The Lower Ball Joint
Installing The Upper Ball Joint
Tools Required:
-
J 9519-30 Ball Joint Fixture
-
J 23454-2 Upper and Lower Ball Joint Sleeve
-
J 23454-3 or J 6382-3 Ball Joint Spacer
1. Lower ball joint (293) into the steering knuckle (274).
-
The ball joint (no cotter pin hole in the threaded end) must be positioned straight.
-
Use J 9519-30, J 23454-2, and J 23454-3 or J 6382-3. Tighten until the ball joint fully seats.
2. Snap ring in position.
3. Upper ball joint (294) into the steering knuckle (274).
-
Use J 9519-30, J 23454-2 and J 23454-3 or J 6382-3. Tighten until the ball joint fully seats.
4. Steering arm (290) (if removed) and steering knuckle (274).
5. Spindle (265).
6. Wheel hub/rotor assembly.
-
Adjust the wheel bearings.
7. Wheel and tire assembly.
-
Check the front end alignment and reset as required.
-
Lower the vehicle.
