gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

A/T - Burned Forward Gear, Overrun or 3-4 Clutches|Page 3089 > < A/T - THM 400 New Forward and Direct Clutch Assemblies
Page 1
background image

Clutch: All Technical Service Bulletins
A/T - Burned Forward Gear, Overrun or 3-4 Clutches

GMC NUMBER:

88-T-32

GROUP:

7A - Automatic Transmission

DATE:

August, 1987

CORPORATE
NUMBER:

867104

SUBJECT:

BURNED FORWARD, OVERRUN OR 3-4 CLUTCHES

MODELS:

ALL 1987 LIGHT DUTY MODELS AND 1988 C/K MODELS WITH THM 700-R4

AUTOMATIC TRANSMISSIONS

FIGURE NO. 1

BULLETIN COVERS:

New, solid (not "scarf cut" - Figure No.. 1) turbine shaft seals, service tools, procedures and parts. Information in this bulletin is not included in your
1987 Service Manual.

FIGURE NO. 2 - THM 700-R4 TRANSMISSION IDENTIFICATION INFORMATION

DATE OF PRODUCTION/SRTA CHANGE:
(Figure No. 2)

By October 6, 1986 (Julian Date 279) all 1987 THM 700-R4 production and Service Replacement Transmission Assembly (SRTA) models were built
with solid turbine shaft seals.

A/T - Burned Forward Gear, Overrun or 3-4 Clutches|Page 3089 > < A/T - THM 400 New Forward and Direct Clutch Assemblies