V 2500 P/U 4WD V8-350 5.7L (1987)
FIGURE 2
FIGURE 3
CHANGE TO ASSEMBLY COMPONENTS:(Figures 2 and 3)
New reverse input housing and drum assembly (605) is revised as follows:
^
Smaller (round versus rectangular) feed hole in hub is 2.413 mm (.095"); was 3.85 x 5.0 mm (.151 x .197")
^
Longer inner housing splines
^
Check valve retainer and ball assembly removed
^
New cast aluminum reverse input clutch piston (607) with 2.057 mm (.081") orifice
^
Reverse input clutch waved plate (611) replaced by a "belleville" plate
