V 2500 P/U 4WD V8-454 7.4L (1988)
7. Condenser to radiator support screws
8. Condenser assembly by pulling it forward and then lowering it from the vehicle.
^ Move the left grille support outboard to gain clearance for condenser removal.
INSTALL OR CONNECT
1. New condenser.
CAUTION: Add 30 ml (1 ounce) of clean refrigerant oil to a new condenser.
2. Left grille support.
3. Radiator support screws.
4. Condenser refrigerant lines.
CAUTION: Use new seals (0-rings) coated with clean refrigerant oil when connecting refrigerant lines.
5. Left grille support to the upper fender support screws.
6. Radiator center support.
7. Grille assembly.
8. Battery ground cable.