V 3500 P/U 4WD V8-350 5.7L VIN K TBI (1988)
Removing Or Installing The Shaft Lip Seal Retaining Ring
2. Shaft seal retainer ring using J 5403.
^
Clean the compressor neck area around the shaft (20), the exposed part of the shaft seal (8) and the O-ring seal groove.
Removing Or Installing The Shaft Tip Seal
3. Shaft lip seal using J 23128-A.
^
Insert J 23128-A into the shaft lip seal, tighten and remove lip seal.
Removing The Shaft Seal Seat O-Ring
4. O-Ring seal using J 9553-01.