W 3500 L4-4.8L DSL Turbo (1999)
Connector Pin insertion
1. Check that the tang lock is fully up.
2. Insert the pin from the connector wire side. Push the pin in until the tang lock closes firmly.
3. Gently pull on the wires to make sure that the connector pin is firmly set in place.
Parts Handling
Be careful when handling electrical parts. They should not be dropped or thrown, because short circuit or other damage may result.
Cable Harness
When installing the parts, be careful not to pinch or wedge the wiring harness.
All electrical connections must be kept clean and tight.
SPLICING WIRE
