W 3500 L4-4.8L DSL Turbo (1999)
![background image](/gmc/w_3500/l4-4.8l_dsl_turbo/Page-103001.png)
Manual Shut-down Lever: Adjustments
ENGINE STOP LINKAGE ADJUSTMENT
Adjust (Figure 13)
1. Be sure that the key switch is in "Lock" position or removed from the key cylinder.
2. Loosen the adjusting bolt (A).
3. Hold the fuel-cut lever (C) in fully-pulled position and remove the slackness of the cable (B) by pulling it in the direction shown by the arrow.
4. Retighten the adjusting bolt (A).