W 3500 L4-5.2L DSL Turbo (2006)
1. Assemble the sedimenter sensor in the new cartridge.
2. Clean the cartridge mounting surface in the filter body so that the cartridge can be seated securely.
3. Coat a thin layer of engine oil on the O-ring in the new cartridge.
4. To simplify air bleed, fill light oil on the new cartridge.
5. Tighten the cartridge until the O-ring touches the sealing surface. During this process take adequate care that the light oil that is inside does not
flow out.
6. Use the filter wrench and tighten rotating by 1/3 to 2/3.
Special tool
Filter wrench: J-22700