W 3500 L4-5.2L DSL Turbo (2006)
12. Install the fuel injector harness connectors. Work from the inside out.
13. Install the harness bracket and tighten the bolts to the specified torque.
Tightening torque: 48 N-m (35 lb ft)
14. Install the fuel injector terminal nuts to the injector.
15. Alternately tighten each nut 2 or 3 turns at a time until the specified torque is reached.
Tightening torque: 2 N-m (17 lb in)
CAUTION: Do not overtighten the nuts. Damage to the terminal studs will result.