W 3500 L4-5.2L DSL Turbo (2006)
Turbo Boost Sensor: Service and Repair
Boost Pressure Sensor Replacement
Removal Procedure
1. Turn off the ignition.
2. Loosen the boost pressure sensor bolt (2).
3. Disconnect the boost pressure sensor connector.
4. Remove the boost pressure sensor (1).
Installation Procedure
1. Install the boost pressure sensor (1).
2. Tighten the boost pressure sensor bolt (2).
Tightening torque: 8 N-m (69 lb in)
3. Connect the boost pressure sensor connector.
