W 3500 L4-5.2L DSL Turbo (2006)
Camshaft Position Sensor: Service and Repair
Camshaft Position (CMP) Sensor Replacement
Removal Procedure
1. Turn off the ignition.
2. Loosen the CMP sensor retaining bolt.
3. Remove the CMP sensor.
Installation Procedure
1. Install the CMP sensor.
-
Apply a thin layer of engine oil over the O-ring and install it.
2. Tighten the CMP sensor retaining bolt.
Tightening torque: 8 N-m (69 lb in)
