W Sprint/Caballero V6-231 3.8L (1982)
Radio/Stereo: Service and Repair
When installing radio, be sure to adjust antenna trimmer for peak reception.
CABALLERO & EL CAMINO
1.
Disconnect battery ground cable.
2.
Remove control knobs from control shafts.
3.
Remove trim plate attaching screws and trim plate.
4.
Disconnect antenna lead and wire connector from radio.
5.
Remove stud nut at right side of bracket attachment.
6.
Remove control shaft nuts and washers.
7.
Remove instrument panel bracket screws and bracket.
8.
Remove radio through opening in instrument panel.
9.
Reverse procedure to install.
