gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Door Panel > < TCS/ABS - Service Stability Message/Multiple DTC's Set|Page 12674
Page 1
background image

Front Door Limiter: Service and Repair

Door Check Link Replacement

Removal Procedure

1. Open the door.
2. Remove the door trim panel.
3. Remove the water deflector.

4. Remove the body-side check strap bolt.
5. Remove the check strap plug.
6. Remove the door-side check strap nuts.
7. Pull the check strap from the inside of the door.

Installation Procedure

1. Install the check strap to the door.
2. Install the check strap to the body.

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the check strap nuts.

Tighten the nuts to 9 N.m (80 lb in).

4. Install the check strap bolt.

Tighten the bolt to 25 N.m (18 lb in).

5. Install the water deflector.
6. Install the door trim panel.

Front Door Panel > < TCS/ABS - Service Stability Message/Multiple DTC's Set|Page 12674