Yukon/Denali 2WD V8-4.8L VIN V (2005)
Front Door Window Glass Weatherstrip: Service and Repair
Door Window Channel
Window Run Channel Replacement - Front Door
Removal Procedure
1. Remove the window.
2. Remove the window glass weatherstrip.
3. Remove the window run channel bolts.
4. Remove the front and the rear window run channels from the door.
Installation Procedure
1. Install the front and the rear window run channels to the door.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the front and the rear window run channel bolts.
1. Tighten the front bolt to 9 N.m (80 lb in).
2. Tighten the rear bolt to 9 N.m (80 lb in).
3. Install the window glass weatherstrip.
4. Install the window.
