Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Install the console door to the console.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the four retaining screws.
Tighten the four retaining screws to 1.6 N.m(14 lb in).
3. Close the lid and ensure the lid is properly aligned.
Key and Lock Cylinder Coding
KEY AND LOCK CYLINDER CODING
KEY IDENTIFICATION AND USAGE
The keys are double sided and reversible. The master key and the valet key contain transponders that are read by the theft deterrent system when the
keys are used in the ignition. The keys have 10 cuts positions (1) with 4 different depths (2).
The keys that are furnished with the vehicle are:
-
The master key, that contains a transponder (3). This key will operate all of the locks on the vehicle.
-
The valet key, that contains a transponder (3). This key will operate the door locks and the ignition lock only.
-
The emergency key, that does not contain a transponder. This key will operate the door locks, and the IP storage compartment lock only. This key
is only intended for emergency use.
CUTTING KEYS
