Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Install the cup holder by pushing inwards till the clips (1) click in place.
2. Ensure around the corners of the cup holder is seated properly.
Cupholder Replacement (Rear)
Cupholder Replacement (Rear)
Removal Procedure
1. Lower the cupholder.
2. Insert a flat bladed tool between the cupholder hinge and the end panel.
3. Pry off the cupholder from the console.
Installation Procedure
1. Install one of the hinge in the opening in the panel.
2. Swing the cupholder assembly so that the other hinge can be installed in the other opening.
3. Inspect for correct operation.
