Yukon/Denali 2WD V8-4.8L VIN V (2005)
7. Install the cable at the shock absorber bracket and install the bolt.
^
Tighten the bolt to 25 N.m (18 lb ft).
Notice: Refer to Fastener Notice.
8. Install the cable to the mounting bracket until the locking tabs snap into place.
9. If vehicle is a 1500 series with the second design or a 2500 series, install the park brake cable to the equalizer bar by pulling down on the cable in
front of the equalizer and installing the cable to the equalizer bar.
