Yukon/Denali 2WD V8-4.8L VIN V (2005)
Notice: Refer to Fastener Notice in Service Precautions.
4. If vehicle is a 1500 series with the second design or a 2500 series, install the nut to the threaded end of the intermediate cable.
^
Tighten the nut to 3.5 N.m (31 lb in).
5. If vehicle is a 1500 series with the first design cable, install the brake cables (2, 3) to the equalizer
6. Remove the safety stands.
7. Lower the vehicle.
8. Adjust the park brake system.
Park Brake Cable Mounting Bracket Replacement
Park Brake Cable Mounting Bracket Replacement
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting..