Yukon/Denali 2WD V8-4.8L VIN V (2005)
7. If equipped without RPO C36 auxiliary heater, connect the surge tank outlet hose to the heater and blower module.Firmly push the hose onto the
heater and blower module pipe until an audible click is heard.
8. If equipped with RPO C36 auxiliary heater, install the surge tank/heater outlet hose (1) to the mounting clip.
9. If equipped without RPO C36 auxiliary heater, install the surge tank/heater outlet hose (1) to the mounting clip.
10. Install the air cleaner outlet duct.
11. Align the arrow at the throttle body end of the duct with the throttle body attaching stud.
Notice: Refer to Fastener Notice in Service Precautions.
12. Tighten the air cleaner outlet duct clamps at the following locations:
