Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Install the upper fan shroud.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the fan shroud bolts.
^
Tighten the bolts to 9 Nm (80 inch lbs.).
3. Install the fan shroud retainers.
4. If equipped install the inlet radiator hose retainer to the fan shroud
5. If equipped install the throttle body heater hose retainer to the fan shroud.
6. Install the air cleaner outlet duct.
7. Tighten the air cleaner outlet duct clamp at the throttle body.
^
Tighten the clamp to 4 Nm (35 inch lbs.).
8. Tighten the air cleaner outlet duct clamp at the mass airflow sensor.
^
Tighten the clamp to 4 Nm (35 inch lbs.).
(W/RPO M74)
Fan Shroud Replacement - Upper (w/RPO M74)
Removal Procedure
