Yukon/Denali 2WD V8-4.8L VIN V (2005)
Notice: Refer to Fastener Notice in Service Precautions.
7. Tighten the J 41476 mounting bolts until snug. Do not overtighten.
1. Tighten the oil pan-to-rear cover bolts to 12 Nm (106 inch lbs.).
2. Tighten the engine rear cover bolts to 25 Nm (18 ft. lbs.).
8. Remove the J 41476.
9. Install a NEW crankshaft rear oil seal. Refer to Crankshaft Rear Oil Seal Replacement.
10. Install the engine flywheel.
