Yukon/Denali 2WD V8-48L VIN V (2005) Water Pump Specifications
11. Position the outlet hose clamp at the water pump.
12. Remove the outlet hose from the water pump.
13. Position the surge tank outlet hose clamp at the water pump.
14. Remove the surge tank outlet hose from the water pump.
15. Position the heater inlet hose clamp at the water pump.
16. Remove the heater inlet hose from the water pump.
17. Remove the water pump bolts.
18. Remove the water pump and gaskets.
19. Discard the water pump gaskets.
Installation Procedure
