Yukon/Denali 2WD V8-4.8L VIN V (2005)
Blower Motor Switch: Service and Repair
BLOWER MOTOR SWITCH REPLACEMENT - AUXILIARY
REMOVAL PROCEDURE
1. Remove the console (1) from the headliner.
2. Remove the auxiliary blower motor switch (2) by releasing the tabs at the rear of the overhead console.
3. Disconnect the electrical connector (3).
INSTALLATION PROCEDURE
1. Connect the electrical connector (3).
2. Install the blower motor switch (2) to the overhead console.
3. Install the overhead console (1) to the headliner.
