Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Install the upper right air temperature sensor (1) to the air distributor duct (3).
2. Connect the electrical connector (1) from the upper right air temperature sensor (2).
3. Install the I/P upper trim panel.
Air Temperature Sensor - Upper Left
AIR TEMPERATURE SENSOR REPLACEMENT - UPPER LEFT
REMOVAL PROCEDURE
1. Remove the upper left air temperature sensor (2) from the air distributor duct (1).
2. Disconnect the electrical connector (3) from the upper left air temperature sensor (2).
INSTALLATION PROCEDURE
1. Install the upper left air temperature sensor (2) to the air distributor duct (1).
2. Connect the electrical connector (3) to the upper left air temperature sensor (2).
Air Temperature Sensor - Lower Auxiliary
AIR TEMPERATURE SENSOR REPLACEMENT - LOWER AUXILIARY
REMOVAL PROCEDURE
1. Remove the right side C-pillar trim panel.
2. Disconnect the electrical connector from the auxiliary lower A/C temperature sensor (10).
3. Remove the auxiliary lower A/C temperature sensor (10) from the air distribution duct.