Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Install the NEW fuel tank module seal onto the fuel tank.
2. Position the fuel tank module part way into the fuel tank.
3. Connect the quick connect fittings (1) to the module cover.
4. Install the fuel tank module into the fuel tank.
5. Place the cam lock ring into position.
6. Rotate the cam lock ring clockwise Using J 45722 until fully seated.
IMPORTANT: Do not allow the tool to come in contact with the pipes while unlocking the cam lock ring.
7. Connect the fuel and EVAP lines to the fuel tank module.
8. Install the fuel tank.
