gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Fuel Injector|Service and Repair > < Fuel Injector Coil Test|Page 4834
Page 2
background image

Steps 1 - 4

Steps 5 - 7

The number below refers to the step number on the diagnostic table.
5. If the pressure drop value for each fuel injector is within 10 kPa (1.5 psi) of the average pressure drop value, the fuel injectors are flowing

properly. Calculate the pressure drop value for each fuel injector by subtracting the second pressure reading from the first pressure reading.

Fuel Injector|Service and Repair > < Fuel Injector Coil Test|Page 4834