Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Insert a flat bladed tool on either side of the switch in order to pry outwards.
2. Pull the switch out to gain access to the wire connector.
3. Disconnect the wire connector.
INSTALLATION PROCEDURE
1. Connect the wire connector to the switch.
2. Install the switch into the opening until it clicks in places.
Heated Seat Switch Replacement - Front
HEATED SEAT SWITCH REPLACEMENT - FRONT
REMOVAL PROCEDURE
1. Remove the front door trim panel.
2. Disconnect the electrical connector.
3. Release the retaining clips for the front seat heater switch assembly in order to remove the switch.