Yukon/Denali 2WD V8-4.8L VIN V (2005)
Ensure the seal is on the stud.
4. Use the J29193 in order to seat the tapers.
^
Tighten the J 29193 or the J 29194 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
5. Install the new idler arm ball stud prevailing torque nut to the idler arm ball stud.
^
Tighten the nut: to 62 Nm (46 ft. lbs.).
6. Install the engine protection shield, if equipped.
7. Lower the vehicle.
8. Check the wheel alignment.
