Yukon/Denali 2WD V8-4.8L VIN V (2005)
5. Remove the adjustment bolt (3) and the adjuster nut (4), for vehicles with MN8, MT1 AND MW3.
6. Remove the J 36202, allowing the torsion bar to unload.
7. Remove the adjustment arm by sliding the torsion bar forward until the torsion bar clears the adjustment arm.
Use your hand to support the adjustment arm as the adjustment arm releases from the torsion bar.
8. Remove the torsion bar crossmember bolts (4) from the weld nuts (1).
