Yukon/Denali 2WD V8-4.8L VIN V (2005)
4. Tighten the bolt on J 29714-A in order to compress the servo cover.
5. Install the servo cover ring.
6. Remove the J 29714-A .
7. Notice: Refer to Fastener Notice in Service Precautions.
Install the oil pan bolt.
^
Tighten the bolt to 11 Nm (97 inch lbs.).
8. Install the heat shield and bolts.
^
Tighten the bolts to 17 Nm (13 ft. lbs.).
9. Install the exhaust pipe.
10. Fill the transmission to the proper level with DEXRON III transmission fluid.