Yukon/Denali 2WD V8-4.8L VIN V (2005)
2. Install the 2-3 shift solenoid (367A) and the 2-3 shift solenoid retainer (395).
3. Install the 1-2 shift solenoid (267A) and the 1-2 shift solenoid retainer (395).
4. Important: When installing the pressure control solenoid, the electrical connector (2) must be in the position shown.
Install the pressure control solenoid (377).
5. Notice: Refer to Fastener Notice in Service Precautions.
Install the pressure control solenoid retainer (378) and retainer bolt (364A) .
^
Tighten the bolt to 11 Nm (97 inch lbs.).
