Yukon/Denali 2WD V8-4.8L VIN V (2005)
16. Install the manual shaft detent roller and spring (3) and bolts.
17. Install the 2 wiring harness clips (1) and bolts (2).
18. Install the wiring harness clip (1) and bolts (2).
19. Install the lube oil pipe (5) with the short end into the valve body.
20. Install the lube oil pipe retainer (7) and the bolt (6).
21. Notice: Refer to Fastener Notice in Service Precautions.
Install the valve body bolts and tighten in the order shown.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
22. Install the remaining valve body bolts.
^
Tighten the bolts to 11 Nm (97 inch lbs.).
23. Connect the internal wiring harness to the valve body electrical components.
24. Install the transmission filter.
