Yukon/Denali 2WD V8-4.8L VIN V (2005)
1. Position the cover (4) to the wiper motor.
2. Install the 4 screws (3) to the cover.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the 4 screws equally to 2.6 N.m (23 lb in).
3. Connect the electrical connector (2) and install the CPA.
4. Install the air inlet panel.
5. Install the wiper arms.
6. Install the radio antenna.
7. Connect the negative battery cable.
8. Close the hood.
