gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Audio - CD Changer Clicking Noise When Initialized|Page 11626 > < Amplifier Replacement|Page 11616
Page 1
background image

CD Changer: Customer Interest
Audio - CD Changer Clicking Noise When Initialized

Bulletin No.: 06-08-44-018A

Date: August 16, 2006

TECHNICAL

Subject:
Remote CD Changer Clicking Noise On Initialization, Freezing Up or Loses Place in a Song, RANDOM Mode, Radio Display Doesn't Match
Disc/Track Number (Replace CD Changer)

Models:
2005-2006 Cadillac Escalade Models
2005-2006 GMC Sierra Denali, Yukon Denali Models

with Remote CD Changer (RPO U1S)

Supercede:

This bulletin is being revised to provide a more detailed description of the customer's concern. Please discard Corporate Bulletin Number 06-08-44-018
(Section 08 - Body and Accessories).

Condition

Some customers may comment that the remote CD changer may click on initialization. Others may comment that the CD changer freezes up or loses
place in a song. In addition, when using the RANDOM Mode, the customer may notice the radio display does not match the disc/track being played.

Cause

The clicking, freezing up or loosing place in a song is caused by initialization when the main micro is coming out of sleep mode (power moding).

The display not matching the disc/track when using RANDOM mode is caused by a software anomaly.

Correction

To address the conditions listed in this bulletin, replace the CD changer with P/N 15825530. Refer to Remote CD Player Replacement in SI.

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Audio - CD Changer Clicking Noise When Initialized|Page 11626 > < Amplifier Replacement|Page 11616