Yukon/Denali 2WD V8-5.3L VIN Z Flex Fuel (2005)
Trunk / Liftgate Striker: Adjustments
Lock Striker Replacement - Endgate (Tahoe/Yukon Adjustment)
Lock Striker Replacement - Endgate (Tahoe/Yukon Adjustment)
1. Remove the rear sill plate trim panel.
2. Loosen the striker bolts.
3. Move the assembly, forward or backward, in order to obtain the proper close of the liftgate.
Notice: Refer to Fastener Notice in Service Precautions.
4. Ensure that the endgate seals completely with the minimum closing effort.
Tighten the striker assembly to 25 N.m (18 lb ft).