Yukon/Denali 2WD V8-5.3L VIN Z Flex Fuel (2005)
Glove Compartment: Procedures
Door Replacement - Instrument Panel (I/P) Compartment
DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
REMOVAL PROCEDURE
1. Close the I/P compartment door.
2. Drill out the 2 rivets (2).
3. Remove I/P storage compartment door retaining screws (1) from the instrument panel.
4. Remove the I/P compartment door.
INSTALLATION PROCEDURE
1. Install the I/P compartment door.
2. Install the I/P compartment retaining screws (1) to the instrument panel.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 1.9 N.m (17 lb in).
Key and Lock Cylinder Coding
KEY AND LOCK CYLINDER CODING
KEY IDENTIFICATION AND USAGE
The keys are double sided and reversible. The master key and the valet key contain transponders that are read by the theft deterrent system when the
keys are used in the ignition. The keys have 10 cuts positions (1) with 4 different depths (2).
The keys that are furnished with the vehicle are:
-
The master key, that contains a transponder (3). This key will operate all of the locks on the vehicle.
-
The valet key, that contains a transponder (3). This key will operate the door locks and the ignition lock only.
-
The emergency key, that does not contain a transponder. This key will operate the door locks, and the IP storage compartment lock only. This key