Yukon/Denali 2WD V8-5.3L VIN Z Flex Fuel (2005)
8. Install the park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Lower the vehicle.
Park Brake Cable Replacement - Intermediate
Park Brake Cable Replacement - Intermediate
Removal Procedure
1. Ensure that the park brake is released.
2. Raise and support the vehicle.
3. If vehicle is a 1500 series with the first design cable, perform the following:
1. Relieve tension on the park brake cables by pulling down on the front park brake cable (1) just in front of the equalizer.
2. Remove the park brake cables (2, 3) from the equalizer bar.
4. If vehicle is a 1500 series with the second design or a 2500 series, perform the following:
1. Remove the nut from the threaded end of the intermediate cable.
2. Disconnect the equalizer from the rear park brake cables.
