Yukon/Denali 2WD V8-5.3L VIN Z Flex Fuel (2005)
6. Install the upper insulator to the shock absorber.
7. Install the nut to the tension end. Do not tighten the nut.
8. Connect the ESC link rod to the sensor, if equipped.
9. Remove the safety stands.
10. Lower the vehicle.
11. Hold the tension end with a wrench while torquing the nut.
^
Tighten the nut to 20 Nm (15 ft. lbs.).
12. Dispose of the shock absorber.
