gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Radio Antenna Module Cable Replacement (From Radio to Module)Radio Antenna Module Cable Replacement (From Radio to Module)|Page 10221 > < Radio Antenna Module Cable Replacement (From Radio to Module)Radio Antenna Module Cable Replacement (From Radio to Module)

Yukon/Denali 2WD V8-6.0L VIN U (2004)

Page 2
background image

4. Install the cable clips (1) to the roof.
5. Connect the cable (2) to the radio antenna module.
6. Connect the wire connector to the radio antenna module.
7. Install the bolt retaining the radio antenna module to the roof.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the retaining bolt to 9 N.m (80 lb in).

8. Install the headliner.
9. Install the I/P trim panel.

Radio Antenna Module Cable Replacement (From Radio to Module)Radio Antenna Module Cable Replacement (From Radio to Module)|Page 10221 > < Radio Antenna Module Cable Replacement (From Radio to Module)Radio Antenna Module Cable Replacement (From Radio to Module)