Yukon/Denali 2WD V8-6.0L VIN U (2004)
1. Install the speaker mounting bracket.
2. Install the bolts (2) retaining the speaker mounting bracket to the door, if removed.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 6 N.m (53 lb in).
3. Install the speaker to the mounting bracket.
4. Connect the electrical connector to the speaker.
5. Install the screws (1) that retain the speaker to the mounting bracket.
Tighten the screws to 2 N.m (53 lb in).
6. Install the door trim panel.
7. Verify the component operation.