Yukon/Denali 2WD V8-6.0L VIN U (2004)
Tighten the retaining screws to 2 N.m (18 lb in).
8. Reposition the inboard seat track trim (1).
9. Connect the floor console electrical connector.
10. Install the center console end panel.
11. Install the console storage bin.
12. Install the cupholder to the console.
13. Install the upper console bezel.
14. Install the radio amp fuse.
Console Replacement - Overhead
Console Replacement - Overhead
Removal Procedure
1. Remove the console roof screw.
2. Disconnect the electrical connectors.
3. Remove the console.
Installation Procedure
1. Install the console to the roof.
2. Connect the electrical connectors.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the console roof screw.
Tighten the screw to 2 N.m (18 lb in).
Console Storage Bin Replacement (Expect Pro)
Console Storage Bin Replacement (Expect Pro)
Removal Procedure
1. Remove the console compartment door.